5.
Open the exit separation pawl assembly [C].
6.
Stopper bracket [D] (
7.
Fusing unit [E] (
x 2,
Support the bottom of the fusing unit with your hand as you remove it.
4.9.2 FUSING UNIT THERMISTORS AND THERMOSTATS
Remove the fusing unit
1.
Upper cover [A] (
2.
Press in on the internal pawls [B] to release them then remove them.
Make sure that the pawls [B] engage correctly when you reinstall the unit.
The thermistor-thermostats are replaced as one unit. A disassembly procedure is not required.
SM
x 1)
x 2)
p.4-70
x 1)
4-71
Fusing Unit
D131/D132/D133