Ricoh D131 Service Manual page 954

Code
0-07 No post-message response
from the other end after a
page was sent
0-08 The other end sent RTN or
PIN after receiving a page,
because there were too many
errors
0-14 Non-standard post message
response code received
D619
Meaning Suggested Cause/Action

Check the line connection.

Replace the FCU.

The other end may have jammed or run
out of paper.

The other end user may have
disconnected the call.

Check for a bad line.

The other end may be defective; try
sending to another machine.

Check the line connection.

Replace the FCU.

The other end may have jammed, or run
out of paper or memory space.

Try adjusting the TX level and/or cable
equalizer settings.

The other end may have a defective
modem/FCU; try sending to another
machine.

Check for line problems and noise.
Cross reference

Tx level - NCU Parameter 01 (PSTN)

Cable equalizer - G3 Switch 07 (PSTN)

Dedicated Tx parameters in Service
Program Mode

Incompatible or defective remote terminal;
try sending to another machine.

Noisy line: resend.

Try adjusting the TX level and/or cable
equalizer settings.

Replace the FCU.
Cross reference
See error code 0-08.
62 SM