Web Unit Re-Assembly - Ricoh D131 Service Manual

Fusing Unit

Web Unit Re-assembly

1. Attach the cleaning roller [A]

Insert the end of the web into the slot
2. Insert the drive pins [B] into the web shaft
3. After installing bushing [C], rotate the shaft right to lock it, then attach the lock screw
4. Set the web [D] under the feeler [E] of the web end sensor
5. Attach bushing 2 [F]
6. Attach the new web roll [G] and wind it tight so no slack remains
D131/D132/D133
.
.
4-74
.
.
.
.
SM