Ricoh D131 Service Manual page 740

3.8 SP6000 PERIPHERALS
6006 ADF Reg. Ad.
ADF Main Reg. Adj:Front
1 Adjusts the side-to-side registration for the front in ADF mode.
[–3 to +3/0/0.1 mm]
ADF Main Reg.
2 Adjusts the side-to-side registration for the back in ADF mode.
[–3 to +3/0/0.1 mm]
ADF L-Edge Registration (Front)
3 Adjusts the vertical registration for the front in ADF mode.
[–5 to +5/0/0.1 mm]
ADF L-Edge Registration (Back)
4 Adjusts the vertical registration for the back in ADF mode.
[–5 to +5/0/0.1 mm]
ADF Buckle Adjustment 1
Adjusts the roller timing at the skew correction sensor/entrance roller. A higher
5
setting causes more buckling.
[–3 to +3/0/0.1 mm]
ADF Buckle Adjustment 2
Adjusts the roller timing at the interval sensor/scanning roller. A higher setting
6
causes more buckling.
[3 to -2/0/0.1 mm]
ADF Trailing Edge Erase Margin (Front)
7 These settings adjust the erase margin for the trailing edges for the front.
[–5 to +5/-1/0.1 mm]
ADF Trailing Edge Erase Margin (Back)
8 These settings adjust the erase margin for the trailing edges for the back.
[–5 to +5/-1/0.1 mm]
SM Appendix 3-165
SP6000 Peripherals
D131/D132/D133