HP A3100-8 v2 SI Configuration Manual page 113

Figure 32 Network diagram for MAC-based VLAN configuration
VLAN 100
IP: 1.1.1.1/24
Eth1/0/2
Device A
Eth1/0/1
VLAN 100
Laptop1
IP: 1.1.1.2/24
MAC: 000d-88f8-4e71
Configuration consideration
Create VLANs 100 and 200.
•
Configure the uplink ports of Device A and Device C as trunk ports, and assign them to VLANs 100
•
and 200.
Configure the downlink ports of Device B as trunk ports, and assign them to VLANs 100 and 200.
•
Configure the uplink ports of Device B as access ports connecting to the servers respectively, and
assign them to VLANs 100 and 200 respectively.
• Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of Laptop
2 with VLAN 200.
Configuration procedure
Configure Device A.
1.
# Create VLANs 100 and 200.
<DeviceA> system-view
[DeviceA] vlan 100
[DeviceA-vlan100] quit
[DeviceA] vlan 200
[DeviceA-vlan200] quit
# Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of Laptop 2
with VLAN 200.
[DeviceA] mac-vlan mac-address 000d-88f8-4e71 vlan 100
[DeviceA] mac-vlan mac-address 0014-222c-aa69 vlan 200
# Configure Laptop 1 and Laptop 2 to access the network through Ethernet 1/0/1. Configure Ethernet
1/0/1 as a hybrid port that sends packets of VLANs 100 and 200 untagged, and enable MAC-based
VLAN on it.
[DeviceA] interface ethernet 1/0/1
Server1
Server2
IP: 1.1.2.1/24
Eth1/0/14
Eth1/0/13
Eth1/0/4
Eth1/0/3
Device B
Laptop2
IP: 1.1.2.2/24
MAC: 0014-222c-aa69
VLAN 200
Eth1/0/2
Device C
Eth1/0/1
VLAN 200
106