Displaying And Maintaining Vlan - HP A3100-8 v2 SI Configuration Manual

Verification
The hosts and the server in VLAN 100 can ping one another successfully. The hosts and the server
1.
in VLAN 200 can ping one another successfully. The hosts/server in VLAN 100 cannot ping the
hosts and the server in VLAN 200, and vice versa.
Display protocol-based VLAN information on Device to determine whether the configurations have
2.
become valid.
# Display protocol-based VLAN configuration on Device.
[Device-Ethernet1/0/2] display protocol-vlan vlan all
VLAN ID:100
Protocol Index
======================================================
VLAN ID:200
Protocol Index
======================================================
# Display protocol-based VLAN information on the ports of Device.
[Device-Ethernet1/0/2] display protocol-vlan interface all
Interface: Ethernet 1/0/1
VLAN ID
======================================================
100
200
Interface: Ethernet 1/0/2
VLAN ID
======================================================
100
200
Configuration guidelines
Protocol-based VLAN configuration applies only to hybrid ports.

Displaying and maintaining VLAN

To do...
Display VLAN information
Display VLAN interface
information
Display hybrid ports or trunk ports
on the device
Display MAC address-to-VLAN
entries
Protocol Type
1 ipv4
Protocol Type
1 ipv6
Protocol Index
1
1
Protocol Index
1
1
Protocol Type
ipv4
ipv6
Protocol Type
ipv4
ipv6
Use the command...
display vlan [ vlan-id1 [ to vlan-id2 ] | all |
dynamic | reserved | static ] [ | { begin |
exclude | include } regular-expression ]
display interface vlan-interface
[ vlan-interface-id ] [ | { begin | exclude |
include } regular-expression ]
display port { hybrid | trunk } [ | { begin |
exclude | include } regular-expression ]
display mac-vlan { all | dynamic |
mac-address mac-address | static | vlan
vlan-id } [ | { begin | exclude | include }
regular-expression ]
112
Remarks
Available in any view
Available in any view
Available in any view
Available in any view