Task
Configuring an uplink policy
Configuring the customer-side port
Configuring the network-side port
Configuration prerequisites
Create CVLANs and SVLANs, and plan CVLANs-to-SVLAN mappings.
Configuring an uplink policy
Follow these steps to configure an uplink policy to map a group of CVLANs of the same customer to one
SVLAN:
To do...
Enter system view
Configure a class for a group of
CVLANs
Return to system view
Configure a behavior for an
SVLAN
Return to system view
Create a QoS policy and enter
QoS policy view
Map the CVLANs to the SVLAN by
associating the class with the
behavior
Configuring the customer-side port
Follow these steps to configure the customer-side port:
To do...
Enter system view
Enter Ethernet interface view
Description
Required
Configures an uplink policy for the customer-side port.
Required
Configures VLAN and other settings required for many-to-one
VLAN mapping.
Required
Configures VLAN and other settings required for many-to-one
VLAN mapping.
Use the command...
system-view
•
Create a class and enter class view
traffic classifier tcl-name operator or
•
Configure multiple CVLANs as match criteria
if-match customer-vlan-id { vlan-id-list | vlan-id1
to vlan-id2 }
quit
•
Create a traffic behavior and enter traffic
behavior view
traffic behavior behavior-name
•
Configure an SVLAN marking action
remark service-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior behavior-name mode
dot1q-tag-manipulation
Use the command...
system-view
interface interface-type
interface-number
159
Remarks
—
Required
—
Required
—
Required
Required
Remarks
—
—