HP A3100-8 v2 SI Configuration Manual page 116

To do...
Create a protocol template for the
VLAN
Exit VLAN view
Enter Ethernet
interface view
Enter Layer 2
Enter interface
aggregate
view or port
interface view
group view
Enter port group
view
Configure the port link type as hybrid
Configure current hybrid port(s) to
permit the packets of the specified
protocol-based VLANs to pass through
Associate the hybrid port(s) with the
specified protocol-based VLAN
Use the command...
protocol-vlan [ protocol-index ]
{ at | ipv4 | ipv6 | ipx { ethernetii
| llc | raw | snap } | mode
{ ethernetii etype etype-id | llc
{ dsap dsap-id [ ssap ssap-id ] |
ssap ssap-id } | snap etype
etype-id } }
quit
interface interface-type
interface-number
interface bridge-aggregation
interface-number
port-group manual
port-group-name
port link-type hybrid
port hybrid vlan vlan-id-list
{ tagged | untagged }
port hybrid protocol-vlan vlan
vlan-id { protocol-index [ to
protocol-end ] | all }
109
Remarks
Required
Required
Required
Use either command.
•
In Ethernet interface view, the
subsequent configurations
apply to the current port.
•
In port group view, the
subsequent configurations
apply to all ports in the port
group.
•
In Layer 2 aggregate
interface view, the
subsequent configurations
apply to the Layer 2
aggregate interface and all
its member ports.
Required
Required
By default, all hybrid ports
permit only packets of VLAN 1 to
pass through.
Required