Configuring An Outer Vlan Tagging Policy In The Qos Policy-Based Approach - HP A3100-8 v2 SI Configuration Manual

To do...
Enter interface
view or port
group view
Enter QinQ view and configure the
SVLAN tag for the port to add
Tag frames of the specified CVLANs
with the current SVLAN
CAUTION:
An inner VLAN tag corresponds to only one outer VLAN tag.
•
To change an outer VLAN tag, you must delete the old outer VLAN tag configuration and configure a
•
new outer VLAN tag.
Configuring an outer VLAN tagging policy in the QoS
policy-based approach
You can configure an outer VLAN tagging policy on the A3100 v2 EI Switch Series in the QoS
policy-based approach.
Configure an outer VLAN tagging policy in the QoS policy-based approach in the following workflow:
Configure a class to match packets with certain tags.
•
Configure a traffic behavior to tag packets with an outer VLAN tag.
•
• Create a QoS policy, associate the class with the behavior in the policy, and globally apply the
policy.
Enable selective QinQ on the port that connects to the user.
•
Follow these steps to configure an outer VLAN tagging policy in the QoS policy-based approach:
To do...
Enter system view
Create a class and enter class view
Specify the inner VLAN IDs of
matching frames
Return to system view
Create a traffic behavior and enter
traffic behavior view
Specify an outer VLAN ID
Use the command...
Enter Ethernet
or Layer 2 interface interface-type
aggregate interface-number
interface view
Enter port
port-group manual
group view port-group-name
qinq vid vlan-id
raw-vlan-id inbound { all |
vlan-list }
Use the command...
system-view
traffic classifier classifier-name
[ operator { and | or } ]
if-match customer-vlan-id
vlan-id-list
quit
traffic behavior behavior-name
nest top-most vlan-id vlan-id
141
Remarks
Required
Use either command.
Required
By default, the SVLAN tag to be
added is the PVID of the receiving
port.
Required
Remarks
—
Required
By default, the operator of a class
is AND.
Required
—
Required
Required