Motorola P-7131N-FGR Product Reference Manual page 249

This guide provides configuration and setup in formation for the ap-7131n-fgr model access point.
Table of Contents

Advertisement

Local WAN IP
Remote Subnet
Remote Subnet Mask Enter the subnet mask for the tunnel's remote network for the
Remote Gateway
Default Gateway
Manual Key Exchange Selecting
Manual Key Settings
Auto (IKE) Key
Exchange
Auto Key Settings
IKE Settings
4. Click
Apply
to save any changes to the
Key Settings, IKE Settings and Manual Key Settings screens. Navigating away from the
screen without clicking the Apply button results in all changes to the screens being lost.
Enter the WAN's numerical (non-DNS) IP address in order for the
tunnel to pass traffic to a remote network.
Specify the numerical (non-DNS) IP address for the Remote Subnet.
tunnel. The remote subnet mask is the subnet setting for the
remote network the tunnel connects to.
Enter a numerical (non-DNS) remote gateway IP address for the
tunnel. The remote gateway IP address is the gateway address on
the remote network the VPN tunnel connects to.
Displays the WAN interface's default gateway IP address.
Manual Key Exchange
keys for AH and/or ESP encryption and authentication. Click the
Manual Key Settings
button to configure the settings.
Select
Manual Key Exchange
Settings
button to open a screen where AH authentication and
ESP encryption/authentication can be configured and keys entered.
For more information, see
page
6-28.
Select the Auto (IKE) Key Exchange checkbox to configure AH and/
or ESP without having to manually enter keys. The keys
automatically generate and rotate for the authentication and
encryption type selected.
Select the Auto (IKE) Key Exchange checkbox, and click the
Key Settings
button to open a screen where AH authentication
and ESP encryption/authentication can be configured. For more
information, see
Configuring Auto Key Settings on page
After selecting Auto (IKE) Key Exchange, click the
button to open a screen where IKE specific settings can be
configured. For more information, see
on page
6-34.
VPN
Configuring Access Point Security
requires you to manually enter
and click the
Manual Key
Configuring Manual Key Settings on
IKE Settings
Configuring IKE Key Settings
screen as well as changes made to the Auto
6-25
Auto
6-32.

Advertisement

Table of Contents
loading

Table of Contents