Motorola P-7131N-FGR Product Reference Manual page 401

AP7131N>admin(network.wireless.wlan)> create
Description:
Defines the parameters of a new WLAN.
Syntax:
create
show wlan
security
acl
qos
set ess
wlan-name
5.0GHz
2.4Ghz
mesh
hotspot
max-mu
idle- timeout
security
acl
no-mu-mu
sbeacon
bcast
qos
rate-limiting
limit w2wl
limit wl2w
add-wlan
Example:
admin(network.wireless.wlan.create)>show wlan
ESS Identifier
WLAN Name
802.11n (5.0 GHz) Radio
802.11n (2.4 GHz) Radio
Client Bridge Mesh Backhaul
Hotspot
Maximum MUs
MU Idle Timeout
Security Policy
MU Access Control
disallow MU to MU
Use Secure Beacon
answer Broadcast ESSID
<number> Displays newly created WLAN and policy number.
Displays security policy summary.
Displays MU ACL policy summary.
Displays QoS policy summary.
<essid> Defines the ESSID for a target WLAN.
<name> Determines the name of this particlular WLAN (1-31).
<mode> Enables or disables access to the access point 5.0 GHz radio.
<mode> Enables or disables access to the access point 2.4 GHz radio.
<mode> Enables or disables the Client Bridge Mesh Backhaul option.
<mode> Enables or disables the Hotspot mode.
<number> Defines the maximum number of MU able to operate within the WLAN
(default = 127 MUs).
<minutes> Sets the interval the access point uses to timeout idle MUs from WLAN
inclusion. Set between 1 -65535 minutes. Default is 30 minutes.
<name> Sets the security policy to the WLAN (1-31).
<name> Sets the MU ACL policy to the WLAN (1-31).
<mode> Enables or disables MUs associated to the same WLAN to not
communicate with each other.
<mode> Enables or disables the AP from transmitting the ESSID in the beacon.
<mode> Enables or disables the access point from accepting broadcast IDs from
MUs. Broadcast IDs are transmitted without security.
<name> The index name representing the QoS policy used with this WLAN.
<mode> Enables or disables MU Rate Limiting
<rate limit> Sets the per-mu rate limit in kb (in the wired-to-wireless direction)
<rate limit> Sets the per-mu rate limit in kb (in the wireless-to-wired direction)
Apply the changes to the modified WLAN and exit.
:
:
: available
: not available
: not available
: not available
: 127
: 30
: Default
:
: disable
: disable
: disable
8-69
CLI Reference