Enabling Wireless Lans (Wlans) - Motorola P-7131N-FGR Product Reference Manual

This guide provides configuration and setup in formation for the ap-7131n-fgr model access point.
Table of Contents

Advertisement

5-26
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
NOTE The username, password and hostname are required to be registered at
3. Enter the DynDNS
4. Enter the DynDNS
5. Provide the
6. Click the
the DynDNS service.
NOTE DynDNS supports devices directly connected to the Internet. Having VPN
7. Once the DynDNS configuration has been updated, click the
button to open a sub-screen displaying the hostname, IP address and any messages received
during an update from the DynDNS Server.
8. Click
Apply
screen without clicking the Apply button results in all changes to the screens being lost.
9. Click
Undo Changes
settings displayed on the screen to the last saved configuration.

5.3 Enabling Wireless LANs (WLANs)

A Wireless Local Area Network (WLAN) is a data-communications system that flexibly extends the
functionalities of a wired LAN. A WLAN does not require lining up devices for line-of-sight
transmission, and are thus, desirable. Within the WLAN, roaming users can be handed off from one
access point to another like a cellular phone system. WLANs can therefore be configured around the
needs of specific groups of users, even when they are not in physical proximity.
Use the access point's
existing WLANs or delete a WLAN to create space for a new WLAN. Sixteen WLANs are available
on the AP-7131N-FGR.
To configure WLANs on the access point:
1. Select
Network Configuration
http://www.dyndns.com.
Username
Password
for the account you wish to use for the access point.
Hostname
for the DynDNS account you wish to use for the access point.
Update DynDNS
button to update the access point's current WAN IP address with
enabled, and the DynDNS Server on the other side of the VPN is not
supported.
to save any changes to the Dynamic DNS screen. Navigating away from the
(if necessary) to undo any changes made. Undo Changes reverts the
Wireless Configuration
for the account you wish to use for the access point.
screen to create new WLANs, edit the properties of
->
Wireless
from the access point menu tree.
Show Update Response

Advertisement

Table of Contents
loading

Table of Contents