Table of Contents
Advertisement
6-56
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
CA Certificate
WARNING! If you have imported a Server or CA certificate, the certificate will not
4. Use the
on the subnet or host attempting to authenticate with the Radius server. Use the
to add entries to the list.Usethe
following information as needed within the table.
Subnet/Host
Netmask
Shared Secret
5. Click
Apply
screen without clicking Apply results in all changes to the screen being lost.
6. Click
Undo Changes
settings displayed on the Radius Server screen to the last saved configuration.
7. Click
Logout
logout before the applet is closed.
You can also choose an imported CA Certificate to use on the
Radius server. If using a server certificate signed by a CA, import
that CA's root certificate using the CA certificates screen (for
information, see
valid CA certificate has been imported, it is available from the CA
Certificate drop-down menu.
be saved when updating the access point's firmware. Export your
certificates before upgrading the access point's firmware. From the
access point CLI, use the
export the certificate to a secure location.
Radius Client Authentication
Defines the IP address of the subnet or host that will be
authenticating with the Radius server. If a WLAN has been created
to support mesh networking, then enter the IP address of mesh
client bridge in order for the MU to authenticate with a base bridge.
Defines the netmask (subnet mask) of the subnet or host
authenticating with the Radius server.
Click the Passwords button and set a shared secret used for each
host or subnet authenticating against the RADIUS server. The
shared secret must be 8 to 16 characters in length.
to save any changes to the Radius Server screen. Navigating away from the
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
Importing a CA Certificate on page
admin(system.cmgr)> expcert
table to configure multiple shared secrets based
button to delete entries from the list.Modify the
Delete
4-18). After a
command to
button
Add
Advertisement
Table of Contents
