Table of Contents
Advertisement
2-22
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
2.9.2 802.11n MUs
Third-party 802.11n clients can connect to the access point using default settings with no additional
user intervention. However, there could be instances where the specific (high-performance) 802.11n
settings cannot be sustained due to adverse radio traffic conditions within the network. When this
occurs, Motorola Solutions recommends changing the Windows XP settings so the adapter can use
settings defined for legacy (802.11a/bg) adapter operation. Once network conditions improve, use
Windows XP to re-enable the adapter for 802.11n support.
To change the access point's settings to support legacy 802.11a/bg operation (using Windows XP):
1. Select
My Network Places.
2. Right-click and select
3. Select (right-click on) the adapter supporting 802.11n operation with the access point and
select Properties.
4. Click on the
The Network Connection screen displays supporting the 802.11n adapter.
5. Select the
6. Select
802.11n Network
the Value drop-down menu.
Select
Disable
access point cannot be sustained (due to network congestion or interference). Once network
conditions improve to the point where 802.11n traffic can be sustained, enable the
Network
Properties.
Configure
button.
Advanced
tab.
from the Property field and select either
when the 802.11n rate settings and performance values defined on the
parameter once again.
The
Network Connections
screen displays.
Enable
or
Disable
from
802.11n
Advertisement
Table of Contents
