Motorola P-7131N-FGR Product Reference Manual page 458

This guide provides configuration and setup in formation for the ap-7131n-fgr model access point.
Table of Contents

Advertisement

8-126
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(network.wireless.qos.create)>
Description:
Defines an access point QoS policy.
Syntax:
show
set
qos-name
vop
mcast
wmm-qos
param-set
cwmin
cwmax
aifsn
txops
default
add-policy
..
Example:
admin(network.wireless.qos.create)>show
Policy Name
Support Voice Prioritization
Multicast (Mask) Address 1
Multicast (Mask) Address 2
WMM QOS Mode
admin(network.wireless.qos.create)>
admin(network.wireless.qos.create)>set default
The WMM parameter is set to "manual".
admin(network.wireless.qos.create)>
For information on configuring the WLAN QoS options available to the access point using the applet (GUI), see
of Service (QoS) Policy on page
Displays QoS policy parameters.
<index>
Sets the QoS name for the specified index entry.
<index>
Enables or disables support (by index) for legacy VOIP devices.
<mac>
<index>
Defines primary and secondary Multicast MAC address. Defines
multicast address index between 1-2.
<index>
Enables or disables the QoS policy index specified.
<set-name>
Defines the data type used with the qos policy and mesh network. When
set to a value other then manual, editing the access category values is
not necessary. Options include; 11g-default, 11b-default, 11g-wifi, 11b-
wifi, 11g-voice, 11b-voice or manual for advanced users).
<access
<index>
Defines Minimum Contention Window (CW-Min) for specified access
category>
categoiry and index.
<access
<index>
Defines Maximum Contention Window (CW-Max) for specified access
category>
categoiry and index.
<access
<index>
Sets Arbitrary Inter-Frame Space Number (AIFSN) for specified access
category>
categoiry and index.
<access
<index>
Configures Opportunity to Transmit Time (TXOPs Time) for specified
category>
access categoiry and index.
<index>
Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
Completes the policy edit and exits the session.
Cancels the changes and exits.
5-39.
:
: disable
: 000000000000
: 000000000000
: disable
Setting the WLAN Quality

Advertisement

Table of Contents
loading

Table of Contents