Table of Contents
Advertisement
have been created, they are selectable within the
existing default security policy does not satisfy the data protection requirements of a specific WLAN,
a new security policy (using the authentication and encryption schemes discussed above) can be
created.
CAUTION Mesh configurations do not support mismatched security policies
To enable an existing WLAN security policy or create a new policy:
1. Select
Network Configuration
The
Security Configuration
2. If a new security policy is required, click the
NOTE An existing security policy can be edited from the Security Configuration
3. Use the
Name
Remember, multiple WLANs can share the same security policy, so be careful not to name
security policies after specific WLANs or risk defining a WLAN to single policy. Motorola
recommends naming the policy after the attributes of the authentication or encryption type
selected.
4. Enable and configure an
Manually Pre-Shared
Key / No
Authentication
802.1x EAP
5. Enable and configure an
when operating using a mixed mode scheme. Ensure the encryptions
and authentication schemes used by APs in a mesh network are
complimentary with one another.
->
Wireless
screen
screen by selecting an existing policy and clicking the
Edit Security Policy
editing an existing security policy, refer to security configuration sections
described in steps 4 and 5.
field to define a logical security policy name.
Authentication
Select this button to disable authentication. This is the default
value for the
Authentication
Select the
802.1x EAP
field within the New Security Policy screen. For specific
information on configuring EAP, see
Settings on page
Encryption
Security
field of each
->
Security
from the access point menu tree.
displays.
Create
button.
screen to edit the policy. For more information on
option if necessary for the target security policy.
field.
button to display the
Configuring 802.1x EAP
6-6.
option if necessary for the target security policy.
Configuring Access Point Security
WLAN
screen. If the
Edit
button. Use the
802.1x EAP Settings
6-5
Advertisement
Table of Contents
