Configuring Ldap Authentication - Motorola P-7131N-FGR Product Reference Manual

6.10.2 Configuring LDAP Authentication

When the Radius Data Source is set to use an external LDAP server (see
Server on page 6-52), the
To configure the LDAP server:
1. Select
System Configuration
the menu tree.
CAUTION Ensure IPSec has been properly configured to protect communications
NOTE For the onboard Radius server to work with Windows Active Directory or
NOTE The LDAP screen displays with unfamiliar alphanumeric characters (if new
screen is used to configure the properties of the external LDAP server.
LDAP
-> User Authentication
with the external LDAP server. Changes will not be applied otherwise.
open LDAP as the database, the user has to be present in a group within
the organizational unit. The same group must be present within the
onboard Radius server's database. The group configured within the
onboard Radius server is used for group policy configuration to support a
new Time Based Rule restriction feature.
to LDAP configuration). Motorola recommends only qualified
administrators change the default values within the LDAP screen.
Configuring Access Point Security
Configuring the Radius
-> RADIUS Server ->
6-57
LDAP from