Adopting An Adaptive Ap Using A Configuration File; Switch Configuration - Motorola P-7131N-FGR Product Reference Manual

7. Click Apply to save the changes to the AAP setup.
NOTE The manual AAP adoption described above can also be conducted using

10.4.1.2 Adopting an Adaptive AP Using a Configuration File

To adopt an AAP using a configuration file:
1. Refer to Adopting an Adaptive AP Manually
parameters.
2. Export the AAP's configuration to a secure location.
Either import the configuration manually to other APs or the same AP later (if you elect to
default its configuration).
For instruction on how to use the access point's configuration import/export functionality,
see Importing/Exporting Configurations on page
For information on updating the access point's firmware, see
Updating Device Firmware on page

10.4.2 Switch Configuration

RFS7000 (running firmware version 4.0 or later) require an explicit adaptive configuration to adopt an
access point (if IPSec is not being used for adoption). The same licenses currently used for AP300
adoption can be used for an AAP.
Disable the switch's Adopt unconfigured radios automatically
requiring adoption, or leave as default. In default mode, any AAP adoption request is honored until
the current switch license limit is reached.
To disable automatic adoption on the switch:
1. Select Network
2. Select the Configuration
Settings button.
the access point's CLI interface using the admin(system.aapsetup)>
command.
4-51.
> Access Port Radios
tab (should be displayed be default) and click the
and define the AAP switch connection
4-47.
option and manually add AAPs
from the switch main menu tree.
Adaptive AP 10-13
Global