Table of Contents
Advertisement
8-96
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(network.wireless.radio)> set
Description:
Sets the access point's radio configuration and defines the RF band of operation.
Syntax:
set radio-config
sensor-only
max-mus
mesh-base
mesh-max
mesh-client
mesh-roaming-client
mesh-timeout
mesh-wlan
dot11-auth
qos-mapping
(wired-to-wireless)
Example:
admin(network.wireless.radio)>set sensor-only enable
***************************
** Conversion to Sensor-only mode is irreversible.
**************************************************************************
Are you sure you want to convert the AP-713x to Sensor-only mode? (yes/no): yes
Please type yes or no
admin(network.wireless.radio)>
admin(network.wireless.radio)>show
Radio Configuration
Sensor-only Mode
<mode>
Sets the radio configuration.
<mode>
Sets sensor only mode as enabled/disabled. When sensor-only is enabled then the
users will be blocked from choosing radio configurations with a data radio.
<mus>>
Defines the maximum number of MUs assigned to the specified radio (idx 1 or 2).
The range can be defined between 0 and 127. This command does not apply to
single radio access points.
<mode> <idx>
Enables or disables base bridge mode based on radio index.
<clients>
Sets the maximum number of wireless bridge clients.
<mode>
Enables or Disables client bridge mode.
<mode>
Enables or disables the mesh roaming client mode. For information on the Mesh
Roaming Client feature, see
<mode>
Sets the client bridge link timeout.
<name>
Defines the client bridge WLAN name.
<auth-algorithm> Defines dot11 level authentication algorithm to either
shared-key-allowed.
<mode>
Sets the QoS mapping from wired to wireless.
dscp
Configures mapping of DSCP values to wireless traffic ID
<dscp-num>
Specify the DSCP value(0-63) to be configured.
<tid-num>
tid0: best effort category traffic
tid1: background category traffic
tid2: background category traffic
tid3: best effort category traffic
tid4: video traffic category traffic
tid5: video traffic category traffic
tid6: voice traffic category traffic
tid7: voice traffic category traffic
WARNING
: enable
Mesh Roaming Client on page
************************************
1-9.
open-system-only
or
Advertisement
Table of Contents
