Table of Contents
Advertisement
6-36
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
IKE Authentication
Passphrase
IKE Encryption
Algorithm
Key Lifetime
Diffie Hellman Group Select a
4. Click
Ok
Settings
5. Click
Cancel
Settings
6.7.5 Viewing VPN Status
Use the
VPN Status
well as their lifetime, transmit and receive statistics. The VPN Status screen is read-only with no
configurable parameters. To configure a VPN tunnel, use the VPN configuration screen in the WAN
section of the access point menu tree.
If you selected
must provide a passphrase.
Select the encryption and authentication algorithms for the VPN
tunnel from the drop-down menu.
•
AES 128-bit - Uses the Advanced Encryption Standard
algorithm with 128-bit. No keys are required to be manually
provided.
•
AES 192-bit - Enables the Advanced Encryption Standard
algorithm with 192-bit. No keys are required to be manually
provided.
•
AES 256-bit - Uses the Advanced Encryption Standard
algorithm with 256-bit. No keys are required to be manually
provided.
The number of seconds the key is valid. At the end of the lifetime,
the key is renegotiated.
This is an IPsec Phase 1 SA lifetime has the default value of 3600
seconds. User can configure this lifetime from 300 - 86400 seconds
The access point forces renegotiation every configured lifetime
seconds.
Diffie-Hellman Group
agreement protocol allows two users to exchange a secret key over
an insecure medium without any prior secrets. Only Group 14- 2048
bit is supported.
to return to the VPN screen. Click Apply to retain the settings made on the
screen.
to return to the VPN screen without retaining the changes made to the
screen.
screen to display the status of the tunnels configured on the access point as
Pre-Shared Key
as the authentication mode, you
to use. The Diffie-Hellman key
IKE
IKE
Advertisement
Table of Contents
