AP7131N>admin(network.firewall)> show
Description:
Displays the access point firewall parameters.
Syntax:
show
Shows all access point firewall settings.
Example:
admin(network.firewall)>show
Firewall Status
NAT Timeout
Configurable Firewall Filters:
ftp bounce attack filter
syn flood attack filter
unaligned ip timestamp filter
source routing attack filter
winnuke attack filter
seq num prediction attack filter
mime flood attack filter
max mime header length
max mime headers
For information on configuring the Firewall options available to the access point using the applet (GUI), see
on page
6-13.
: enable
: 10 minutes
: enable
: enable
: enable
: enable
: enable
: enable
: enable
: 8192 bytes
: 16 headers
8-149
CLI Reference
Configuring Firewall Settings