Sony DVS-9000 User Manual page 120

6
Carrying out level settings
To set the low level and high level, first set the trigger type to "Level," then use
the following procedure.
1
2
3
Making switcher processor GPI output settings
Use the following procedure.
120
Setup Relating to Switcher Processor
When Target is Common/Setup: FM Src1 Field Freeze, FM Src1 Frame Freeze, FM
Src2 Field Freeze, FM Src2 Frame Freeze
FM Src1 Freeze Off, FM Src2 Freeze Off
User1 SS ? Recall, User1 EFF ? Recall, User1 EFF ? Recall & Run, User1 KF Run,
User1 KF Stop, User1 KF Rewind
User2 SS ? Recall, User2 EFF ? Recall, User2 EFF ? Recall & Run, User2 KF Run,
User2 KF Stop, User2 KF Rewind
• Action list when the trigger type is "Level"
When Target is M/E-1, M/E-2, M/E-3, or P/P: Aspect, No Action
When Target is Common/Setup: Format, Aspect, No Action
b) When knob 3 selection is "Snapshot"
c) When knob 3 selection is "Effect"
Press [Action Set] to confirm the action selection.
The selected setting appears in the status area.
In the Switcher>Device Interface menu, select the action to be set, and
press [H/L Set].
The H/L Set menu appears.
Using any of the following methods, select the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the setting.
Knob Parameter Adjustment
1 No Signal format/screen aspect ratio
selection
To apply the selection made in step 2 when the input is high, press [H Set].
To apply the selection made in step 2 when the input is low, press [L Set].
This confirms the setting, which appears in the status area.
Note
When the action is "Format," these settings conflict with the current
settings, but after making the settings, agreement is restored after a pulse
change or power off/on.
Setting values
1 to ...