Insertion; Modification - Sony DVS-9000 User Manual

Insertion

Inserting keyframes
To insert a keyframe in an existing effect, use the following procedure in the
keyframe control block.
1
2
3
4

Modification

Modifying keyframes
Use the following procedure in the keyframe control block.
1
2
26
Creating and Editing Keyframes
Press the [EDIT ENBL] button, turning it on.
Stop the effect at the desired edit point.
Create the image for the keyframe you want to insert.
Press the [INS] button.
When the edit point is on a keyframe, to insert the new keyframe before
the existing keyframe, hold down the [SHIFT] button and press the [INS]
button.
This inserts the current image as the new keyframe.
Inserting a keyframe may change the total duration of the effect. (See
"Time Settings" in Chapter 1 (Volume 1).)
Press the [EDIT ENBL] button, turning it on.
Stop the effect at the desired edit point.
When the edit point is on a keyframe, this is what you modify. If the edit
point is between two keyframes, the previous keyframe is what you
modify.
Note
In constant duration mode (see "Effect Editing" in Chapter 1 (Volume 1))
modification is only possible when the edit point is on a keyframe.