Sony DVS-9000 User Manual page 59

• Copy: Copy the contents of one register to another register.
• Move: Move the contents of one register to another register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
Write-protecting the contents of the snapshot register
Use the following procedure.
Note
It is not possible to write-protect an empty register.
1
In the Snapshot menu, press VF2 'Snapshot' and HF2 'Lock.'
The Snapshot>Snapshot>Lock menu appears.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window.
The selected region name appears in the upper part of the list.
3
To select the desired register, press on the register number or register name
in the status area, or use knob 1.
Knob
1
4
Press [Lock], write-protecting the register.
Copying, moving, and swapping snapshot register data
This section describes the procedure for copying. You can move or swap
registers using a similar procedure.
1
In the Snapshot menu, press VF2 'Snapshot' and HF3 'Copy.'
• The Snapshot>Snapshot>Copy menu appears.
• The left side of the status area shows the snapshot register number of the
copy source, and the right side shows the snapshot register number of the
copy destination.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window.
The selected region name appears in the upper part of the list.
Parameter Adjustment
Register Register number
Setting values
1 to 99
Snapshot Operations in the Menus
59