Operations On Individual Files - Sony DVS-9000 User Manual

Operations on Individual Files

You can save or recall the contents of an individual file or register. Carry out
these operations in the File menu.
To access the File menu
In the menu control block, press the top menu selection button [FILE].
This explanation shows the example of the File>Effect, Snapshot menu in
which you carry out keyframe effect and snapshot file operations, but the
procedure is similar in the following menus.
Setup, Initial Status: for file operations on setup data and initial status.
Key/V Proc Memory: for file operations on key memory or video process
Wipe/DME/Key SS: for file operations on wipes, DME wipes, and key
Shotbox: for shotbox file operations.
For an overview, see "Files" in Chapter 1 (Volume 1).
Changing the display of files in the File menu
By pressing the following buttons in the right part of the status area, you can
change the appearance of the list of files.
System: In addition to the number and name of the register or file, show the
SW'er Region: In addition to the number and name of the register or file, show
DME Region: In addition to the number and name of the register or file, show
Misc Region: Show the following data:
148

Operations on Individual Files

memory.
snapshots.
type of data as follows:
Sy: system-related data
Sw: switcher-related data
Dm: DME-related data
Pa: panel-related data
Rt: Router-related data
TG: tally-related data and GPI-related data
switcher-related data as follows:
M1 to M3: M/E-1 to M/E-3 related data
PP: P/P related data
U1 to U2: User1 to User2 related data
DME-related data as follows.
1 to 4: Data relating to DME1 to DME4.
PB: P-BUS-related data
G: GPI-related data
Rt: router-related data