Saving Files; Recalling Files - Sony DVS-9000 User Manual

Saving Files

To save the contents of a register on the hard disk or memory card, use the
following procedure.
1
2
3
4
5

Recalling Files

To recall the data saved in a file on the hard disk or memory card to a register,
use the following procedure.
1
150
Operations on Individual Files
In the File menu, select VF3 'Effect, Snapshot' and HF1 'Save.'
The File>Effect, Snapshot>Save menu appears. The top side of the status
area shows the register name, and the bottom side shows the save
destination.
If necessary, change the currently selected medium for recording ([HDD]
or [Memory Card]). (See "Selecting the Recording Medium" (page 149).)
In the <Category> group, select what the operation applies to.
Effect: keyframe effect register
Snapshot: snapshot register
In the <Select> group, choose the method of selection, and in the status
area select the registers.
All: When this is on, all registers are selected for the operation.
Plural: When this is on, you can specify a number of registers to which the
operation will apply. In this case, in the status area, press the number
or name of desired registers, turning them to reverse video. To cancel
a selection, press once more to return to normal display.
When both of the above buttons are off: You can specify any register,
using either of the following methods.
• Press the arrow keys to scroll the reverse video cursor.
• Press directly on the list appearing in the status area.
Press [Save].
This saves the data of the selected register.
In the File menu, select VF3 'Effect, Snapshot' and HF2 'Load.'