Sony DVS-9000 User Manual page 131

To display the Output Config menu
In Engineering Setup, select VF5 'DCU' and HF3 'Output Config.'
The status area shows output port information.
Assigning a GPI output port
Use the following procedure.
1
In the DCU>Output Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
2
In the <Parallel Output Assign> group, press [GPI Output].
3
Using any of the following methods, select the output port and GPI output
number.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob
1
2
5
4
To confirm the selected setting, press [GPI Output Set].
This confirms the selection, which is reflected in the status area.
Releasing the assignment of a GPI output port
Use the following procedure.
1
In the DCU>Output Config menu, select what the setting applies to (DCU1
or DCU2) from the <DCU Select> group.
2
Turn the knobs to select the slot and port to which the setting applies.
Knob
1
2
3
4
Parameter
Parallel Output Slot
Parallel Output Port
GPI Output
Parameter Adjustment
From Slot First port slot
From No First port number
To Slot Last port slot
To No Last port number
Adjustment Setting values
Output port slot 2 to 6
Output port 1 to 54
GPI output 1 to 50
Setting values
2 to 6
1 to 54
2 to 6
1 to 54
Setup Relating to DCU
131