Sony DVS-9000 User Manual page 92

can only carry out assignment of the video and key combinations in the Main
table.
You can select the table to be used for each of the following banks or buses.
Use the following procedure.
1
2
3
Creating a "sub" table
To set the Sub1 table, use the following procedure.
1
2
3
92
Setup Relating to Operations From the Control Panel
• M/E-1 and PGM/PST banks
• Frame Memory Source 1/2
• DME 1V/K to DME 4V/K
• M/E-1 Utility1, P/P Utility1, M/E-1 Utility2, P/P Utility 2, DSK1 to
DSK4 Fill/Source
• Aux1 to Aux48, Edit Preview, Monitor1 to Monitor8
In the Panel>Xpt Assign menu, press [Multi Xpt Assign].
The Multi Xpt Assign menu appears.
The status area shows the bank and bus names, and the cross-point assign
table.
Using any of the following methods, select the bank or bus.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the setting.
Knob Parameter Adjustment
1 Bank/Bus Bank or bus selection
In the <Xpt Table Select> group, select the cross-point table you want to
assign.
In the Panel>Xpt Assign>Multi Xpt Assign menu, press [Sub Table
Assign].
The Sub Table Assign menu appears.
The status area shows a list of the sub table assignments.
In the <Sub Table Select> group, select the sub table you want to set.
Using any of the following methods, select the cross-point button for
which you want to make an assignment.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn knob 1 to make the setting.
Setting values
1 to 98