Sony DVS-9000 User Manual page 141

To display the Tally Copy menu
In the Engineering Setup menu, select VF7 'Router/Tally' and HF5 'Tally
Copy.'
The status area shows the tally copy status.
Making new tally copy settings
Use the following procedure.
1
In the Router/Tally>Tally Copy menu, select [New].
The New menu appears.
2
With a knob operation, select the copy-from source.
To make a number of tally copy settings, you can specify the copy-from
source start address and end address.
Knob
1
2
3
Specify the copy-to source address.
Knob
3
4
4
Press [Execute].
This makes the tally copy setting according to the specifications in steps 2
and 3.
Modifying tally copy settings
Use the following procedure.
1
In the Router/Tally>Tally Copy menu, press [Modify].
The Modify menu appears.
2
Use the knobs to select the copy source and copy destination.
Knob
1
Parameter Adjustment
Copy From (From) Copy-from source start address
Copy From (To) Copy-from source end address
Parameter Adjustment
Copy To (From) Copy-to source (start) address
Copy To (To) Copy-to source (end) address
Parameter Adjustment
Copy From Copy-from source
Setting values
1 to 1024
1 to 1024
Setting values
1 to 1024
1 to 1024
Setup Relating to Router Interface and Tally
Setting values
1 to 1024
141