Sony DVS-9000 User Manual page 109

2
Adjust the following parameters.
Knob
1
2
3
To set the values to the default values, press [Default].
Making vertical blanking interval adjustment and through mode
settings
Use the following procedure.
1
In the Switcher>Output menu, press [V Blank/Through].
The V Blank/Through menu appears.
The status area shows the output ports and the assigned signals, the vertical
blanking interval for field 1 and field 2, and the through mode Enable/
Disable status.
2
Adjust the parameter.
Knob
2
a) Depending on the signal format, the adjustment range varies as follows.
• 480i: 10 to 19
• 576i: 6 to 22
To return the values to their defaults, press [Default].
3
To enable the through mode, press [Through Mode], setting it to Enable.
Making safe title settings
Use the following procedure.
1
In the Switcher>Output menu, press [Safe Title].
The Safe Title menu appears.
The status area shows the output ports and the assigned signals, with the
box 1, box 2, and cross states.
Parameter Adjustment
White Clip Luminance signal white clip value 90.00 to 109.00
Dark Clip Luminance signal dark clip value
Chroma Clip Chrominance signal clip value
Parameter Adjustment
Mask End Final value for vertical blanking
interval
Setting values
−6.85 to +10.00
90.00 to 113.17
Setting values
a)
See note below
Setup Relating to Switcher Processor
109