Settings Relating To Keys, Wipes And Frame Memory; Menu); (Key/Wipe/Fm Menu) - Sony DVS-9000 User Manual

1
2

Settings Relating to Keys, Wipes and Frame Memory

(Key/Wipe/FM Menu)

For settings relating to keys, wipes and frame memory, use the Switcher>Key/
Wipe/FM menu.
To display the Key/Wipe/FM menu
In the Engineering Setup menu, select VF3 'Switcher' and HF5 'Key/Wipe/
FM.'
The status area shows the key memory settings, and for each operating bank
the key priority, cross-point hold, pattern limit transition, and wipe edge
settings.
Selecting the key memory mode
In the Switcher>Key/Wipe/FM menu, select Bank, then in the <Key Memory>
group, select one from Full (full mode)/Simple (simple mode)/Off.
For more details, see "Key Memory" in Chapter 1 (Volume 1).
Switching video process memory on or off
In the Switcher>Key/Wipe/FM menu, press [Video Proc Memory], turning it
on. (See also "Switcher Setup" in Chapter 1 (Volume 1).)
Settings for the show key function
Use the following procedure.
1
112
Setup Relating to Switcher Processor
In the Switcher>Transition menu, press [Transition Curve].
The Transition Curve menu appears.
In the <Fader Curve> group, select the fader lever operation mode.
Normal: The transition progress is linear, according to the fader lever
position. (Factory default setting)
Adv Tally Mode: When the fader lever is moved from the end of its travel,
the tally is output slightly before the transition starts.
In the Switcher>Key/Wipe/FM menu, press [Show Key].
The Show Key menu appears.