Moving Files - Sony DVS-9000 User Manual

2
3
4
5

Moving Files

To move data between the hard disk and memory card, use the following
procedure.
1
2
3
152
Operations on Individual Files
If necessary, change the currently selected medium for recording ([HDD]
or [Memory Card]) for each of the copy source and copy destination. (See
"Selecting the Recording Medium" (page 149).)
In the <Category> group, select what the operation applies to.
Effect: keyframe effect file
Snapshot: snapshot file
In the <Select> group, choose the method of selection, and in the status
area, select the files.
All: When this is on, all files are selected for the operation.
Plural: When this is on, you can specify a number of files to which the
operation will apply. In this case, in the status area, press the number
or name of the desired files, turning them to reverse video. To cancel
a selection, press once more to return to normal display.
When both of the above buttons are off: You can specify any file, using
either of the following methods.
• Press the arrow keys to scroll the reverse video cursor.
• Press directly on the list appearing in the status area.
Press [Copy].
This copies the files.
In the File menu, select VF3 'Effect, Snapshot' and HF4 'Move.'
The File>Effect, Snapshot>Move menu appears. The top side of the status
area shows the move source, and the bottom side shows the move
destination.
If necessary, change the currently selected medium for recording ([HDD]
or [Memory Card]) for each of the move source and move destination,
respectively. (See "Selecting the Recording Medium" (page 149).)
In the <Category> group, select what the operation applies to.
Effect: keyframe effect file
Snapshot: snapshot file