Sony DVS-9000 User Manual page 108

3
4
Selecting the output signal to which settings apply
In the following video clip adjustment, vertical blanking interval adjustment
and through mode setting, and safe title setting, use either of the following
methods to select the output signal before making the setting.
• Press directly on the list in the status area.
• Press the arrow keys to move the reverse video cursor.
The selected output signal appears in reverse video.
Adjusting the video clip
To adjust the clip value for each of the output signals from the Output 1 to 48
ports, use the following procedure.
1
108
Setup Relating to Switcher Processor
PGM/PST 1 to 6
DME Monitor Video
DME Monitor Key
[Aux Bus]: It is not possible to make duplicate assignments.
Preset
Edit Preview
AUX 1 to 48
Using any of the following methods, select the output port number and
signal to be assigned.
• Press directly on the list appearing in the status area to make the
selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the selection.
Knob Parameter Adjustment
1 Output No Output port number
2 Source No Selection of signal to be assigned
• For output ports not to be assigned, press [Inhibit].
The selected signal appears in reverse video.
Press [Set] to confirm the assignment.
In the Switcher>Output menu, press [Video Clip].
The Video Clip menu appears.
The status area shows the output ports and assigned signals, and the white
clip, dark clip, and chrominance clip values.
Setting values
1 to 48
—