Sony DVS-9000 User Manual page 115

Knob
1
3
Press [Link Bus Select].
The Link Bus Select menu appears.
The status area lists the current setting status of the selected link and the
buses that can be selected.
4
In the <Bus Select> group, select [Master Bus] (link source bus).
5
Using knob 2, select the bus to be the link source, and press [Bus Set].
Knob Parameter
2
6
In the <Bus Select> group, select [Linked Bus] (link destination bus).
7
Referring to step 5, select the bus to be the link destination, and press [Bus
Set].
8
Turn knob 3 to select the link table, and press [Link Table Set].
Knob Parameter
3
For more information about link tables, see the following item.
The status area reflects the current setting status.
To delete a link
Select the link you want to delete, then press [Clear] in the Internal Bus
Link menu.
Making link table settings
Use the following procedure.
1
In the Internal Bus Link menu, press [Link Table Select].
The Link Table Select menu appears.
Parameter Adjustment
Link No Link number
Adjustment
No Bus selection
Adjustment
Link Table No Link table selection
Setting values
1 to 64
Setting values
1 to 112
Setting values
1 to 8
Setup Relating to Switcher Processor
115