Binary Output; Function Keys; A.5.3 Binary Output - Siemens 7SK80 Manual

A.5.3

Binary Output

Table A-9
Binary Output
BO1
BO2
BO3
BO4
BO5
Table A-10
Binary Output
BO6
BO7
BO8
A.5.4

Function Keys

Table A-11
Function Keys
F1
F2
F3
F4
F5
F6
F7
F8
F9
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012
Output Relay Presettings for All Devices and Ordering Variants
Default function Function No.
Relay TRIP 511
52Breaker
52Breaker
52Breaker
Failure Σ I
162
Fail I balance 163
Fail V balance 167
Fail Ph. Seq. I 175
Fail Ph. Seq. V 176
VT brk. wire 253
Relay PICKUP 501
Further Output Relay Presettings for 7SK802* or 7SK804*
Default function Function No.
not pre-assigned -
not pre-assigned -
not pre-assigned -
Applies to All Devices and Ordered Variants
Display of the operational indications
Display of the primary operational measured values
Display of the last fault log buffer
not pre-assigned
not pre-assigned
not pre-assigned
not pre-assigned
not pre-assigned
not pre-assigned
Description
Relay GENERAL TRIP command
52 Breaker
52 Breaker
52 Breaker
Failure: Current Summation
Failure: Current Balance
Failure: Voltage Balance
Failure: Phase Sequence Current
Failure: Phase Sequence Voltage
Failure VT circuit: broken wire
Relay PICKUP
Description
-
-
-
Default function
Appendix
A.5 Default Settings
447