Siemens 7SK80 Manual page 38

Functions
2.1 General
No. Information
69 DayLightSavTime
70 Settings Calc.
71 Settings Check
72 Level-2 change
73 Local change
110 Event Lost
113 Flag Lost
125 Chatter ON
140 Error Sum Alarm
160 Alarm Sum Event
177 Fail Battery
178 I/O-Board error
181 Error A/D-conv.
191 Error Offset
193 Alarm NO calibr
194 Error neutralCT
232 CT ph mismatch
233 CT gnd mismatch
301 Pow.Sys.Flt.
302 Fault Event
303 sens Gnd flt
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New
335 >GOOSE-Stop
502 Relay Drop Out
510 Relay CLOSE
545 PU Time
546 TRIP Time
10080 Error Ext I/O
10081 Error Ethernet
10082 Error Terminal
10083 Error Basic I/O
38
Type of In-
formation
OUT Daylight Saving Time
OUT Setting calculation is running
OUT Settings Check
OUT Level-2 change
OUT Local setting change
OUT_Ev Event lost
OUT Flag Lost
OUT Chatter ON
OUT Error with a summary alarm
OUT Alarm Summary Event
OUT Failure: Battery empty
OUT I/O-Board Error
OUT Error: A/D converter
OUT Error: Offset
OUT Alarm: NO calibration data available
OUT Error: Neutral CT different from MLFB
OUT LPCT phase Current Transf. mismatching
OUT LPCT ground Current Transf. mismatching
OUT Power System fault
OUT Fault Event
OUT sensitive Ground fault
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
SP >GOOSE-Stop
SP Relay Drop Out
SP General CLOSE of relay
VI Time from Pickup to drop out
VI Time from Pickup to TRIP
OUT Error Extension I/O
OUT Error Ethernet
OUT Error Current Terminal
OUT Error Basic I/O
Comments
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012