Table of Contents
Advertisement
Mounting and Commissioning
3.3 Commissioning
Figure 3-25
Then, transfer the data to the protection device (see the following figure).
Figure 3-26
Terminal Test
The system interface (EN 100) is preassigned with the default value zero and the module is thus set to DHCP
mode. The IP address can be set in the DIGSI Manager (Object properties... / Communication parameters /
System interface [Ethernet]).
332
Module-specific settings
Transmitting data
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012
Advertisement
Table of Contents
