Siemens 7SK80 Manual page 7

Siprotec motor protection
Hide thumbs Also See for 7SK80:
Table of Contents

Advertisement

Besides these, graphical symbols are used according to IEC 60617-12 and IEC 60617-13 or symbols derived
from these standards. Some of the most frequently used are listed below:
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012
Analog input variable
AND operation of input variables
OR operation of input variables
Exclusive OR (antivalence): output is active if only one of the inputs is
active
Coincidence: output is active if both inputs are active or inactive at the
same time
Dynamic input signals (edge-triggered) above with positive, below with
negative edge
Formation of one analog output signal from a number of analog input
signals
Threshold element with setting address and parameter names
Timer (pickup delay T adjustable) with setting address and parameter
names
Timer (dropout delay T not adjustable)
Edge-triggered time element with action time T
Static memory (SR flipflop) with setting input (S), resetting input (R),
output (Q) and inverted output (Q), setting input dominant
Static memory (RS-flipflop) with resetting input (R) setting input (S),
output (Q) and inverted output (Q), resetting input dominant
Preface
7

Advertisement

Table of Contents
loading

Table of Contents