Table of Contents
Advertisement
Mounting and Commissioning
3.1 Mounting and Connections
Figure 3-9
Figure 3-10
Now, a SIPROTEC 4 communication module can be installed (see Section Installation or Replacement of a
SIPROTEC 4 Communication Module). Otherwise, the device can be reassembled again (see Section Reas-
sembly).
Installation or Replacement of a SIPROTEC 4 Communication Module
The following description assumes the normal case that a SIPROTEC 4 communication module which has not
yet been existing is retrofitted.
If a SIPROTEC 4 communication module has to be removed or replaced, the steps are to be performed in
reverse order.
Note
The installation can only be performed alone or after the installation of the Ethernet module.
314
Ethernet interface with support frame
Installation of the Ethernet interface
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012
Advertisement
Table of Contents
