Removing The Printer Module - ZOLL Propaq MD Service Manual

C 3 D
HAPTER ISASSEMBLY

Removing the Printer Module

Tools Required
#1 Phillips screwdriver with torque capability
•
Setup
This procedure should be conducted on a static mat.
•
Wear a wrist strap to ground during the procedure.
•
To reinstall the printer module, reverse the steps.
Printer Disassembly
1 Place the unit on the mat in a
horizontal position.
2 Open the printer housing and
remove the printer paper.
3 Place the unit screen down
and remove the three (3)
screws outside the printer
module in the illustrated
areas.
Note: During reassembly,
torque screws to 6 in-lbs.
62
P
ROCEDURES
9650-0807-01 Rev. C