Disassembly Procedures
Overview
This chapter provides instructions on how to disassemble and reassemble the Propaq MD unit,
and includes the following sections:
Required Equipment
•
Safety Precautions
•
Modules
•
Handle Disassembly
•
Printer Disassembly
•
Main Unit Disassembly
•
Front Enclosure Disassembly
•
Display Disassembly
•
NIBP and EtCO
•
Monitor Board and SpO
•
CP Carrier Disassembly
•
Defibrillator Board and Capacitor Bank Disassembly
•
AUX Power Connector Disassembly
•
Dock Connector Disassembly
•
Required Equipment
No. 1 Phillips screwdriver with torque capability
•
No. 2 Phillips screwdriver with torque capability
•
Wooden stick (Available from H.A. Stiles: 1-800-447-8537)
•
Needle nose pliers
•
6 mm socket wrench
•
26 mm socket wrench
•
9650-0807-01 Rev. C
Disassembly
2
Disassembly
2
X Series Service Manual
Chapter 3
59