Removing The Handle - ZOLL Propaq MD Service Manual

Removing the Handle

Tools Required
#1 Phillips screwdriver with torque capability
•
Wooden stick
•
Setup
This procedure should be conducted on a static mat.
•
Wear a wrist strap to ground during the procedure.
•
To reinstall the handle assembly, reverse the steps.
Handle Disassembly
1 Using a wooden stick, lift the
screw covers off the handle in
two locations.
2 Remove four (4) screws (2 on
each handle) and remove the
handle.
Note: During reassembly,
torque screws to 8 in-lbs.
9650-0807-01 Rev. C Propaq MD Service Manual
Removing the Handle
61