Applicable Connector And Cable Size - Mitsubishi Electric FX2N-10PG User Manual

Model FX2N-10PG Pulse Output Block
2.3.1

Applicable connector and cable size

The connectors for the multi-wire cables are prepared as a set to allow the customer to
produce the input/output cables.
The cables and crimp tool should be prepared by the customer.
Model name and configuration of
input/output connector
FX -I/O-CON-S
2C
For multi-wire cable: 5 sets
FX -I/O-CON-SA
2C
For multi-wire cable: 5 sets
*1 Since it may be difficult to pass the random cable through the housing depending on the
variation of the sheath thickness, UL-1061 cable is recommended.
* Phoenix contact crimp tool.
Model name
Outside dimensions and component names 2
Applicable cable and tool
Cable size
2
AWG22(0.3mm )
2
AWG20(0.5mm )
2-4