Mitsubishi Electric FX2N-10PG User Manual page 112

Model FX2N-10PG Pulse Output Block
LED
Status
name
DOG Unlit.
PG0 Unlit.
φA
Unlit.
φB
Unlit.
X0,X1 Unlit.
Display details
Dog input OFF
Zero point signal input OFF
A-phase input OFF of manual
pulse generator
B-phase input OFF of manual
pulse generator
Interrupt input OFF
Countermeasure
• If LED is not lit when dog input is turned on,
check the input wiring. The external power
supply (24V DC) is necessary for START,
DOG, X0 and X1 input of FX
• If LED is not lit even though zero-point signal is
input, check the input wiring. The external
power supply (5V DC) is necessary when the
open collector transistor is used for PG0 input
of FX -10PG.
2N
• If LED is not lit even though pulse is input from
the manual pulse generator, check the input
wiring. The external power supply (5V DC) is
necessary when the manual pulse generator of
open collector output type is used.
• If LED is not lit even though interrupt input is
turned on, check the input wiring. The external
power supply (24V DC) is necessary for
START, DOG, X0 and X1 input of FX
Diagnostics 10
-10PG.
2N
-10PG.
2N
10-2