Mitsubishi Electric FX2N-10PG User Manual page 44

Model FX2N-10PG Pulse Output Block
• A single buffer memory No. is used for 16-bit data, and that of a serial buffer memory No. is
used for 32-bit data.
Use the 16-bit command (FROM/TO) for the buffer memory of 16-bit data.
Use the 32-bit command (
Treat the m code information (BFM#104, #110, ..... #248) and operation information
(BFM#105, #111, ..... #1299) as 32-bit data.
• Attribute : W ... Writing
• Unit : User unit ... Varies as the system unit (BFM#36) is set.
FROM/
D
MOV K1
MOV K0
D TO K0 K104 D0
R ... Reading
TO) for the buffer memory of 32-bit data.
D
D0
K1→D0 m code 1
Operation information 0
D1
K0→D1
(Step-advance operation)
D0→BFM#104
K1
D1→BFM#105
Buffer memory (BFM) 7
7-4