Input Specifications; Output Specifications - Mitsubishi Electric FX2N-10PG User Manual

Model FX2N-10PG Pulse Output Block
5.4

Input specifications

Item
Number of input
points
Input signal
voltage
Signal format
Input signal
current
Input ON
sensitivity
Input OFF
sensitivity
Input receiving
speed
Circuit insulation Photocoupler insulation
Operation
indication
5.5

Output specifications

Item
Number of output
points
Output system
Output type
Rated load
voltage
Max. load current 25mA or less
VIN current
consumption
Max. voltage drop
during ON
Leak current
during ON
Output frequency FP+, RP+ Max. 1MHz
Operation
indication
START, DOG, X1
Three control input points (START, DOG, PG0), two interrupt input points (X0, X1)
2-phase pulse input point (φA, φB)
24V DC ± 10%
Contact or open collector
transistor
6.5 ± 1mA
4.5mA or more
1.5mA or less
0.1ms or less
(1.0ms or less for DOG)
LED is lit when input is ON.
Pulse output section
Three output points (FP , RP , CLR)
Forward pulse (FP) / reverse pulse (RP)
or pulse (PLS) / direction (DIR) is
selectable.
Differential line driver output
VIN 5 to 24V DC
24V DC: 70mA 5V DC: 100mA
⎯
⎯
LED is lit when output is ON.
φA, φB
3.0 to 5.5V DC
Differential line driver or
open collector transistor
6 to 20mA
6.0mA or more
1mA or less
2-phase pulse
30,000Hz or less
(Duty 50%)
When zero return operation is
completed, it is turned on.
(Output pulse width: 20ms)
NPN open collector transistor output
VIN 5 to 24V DC
20mA or less
1.5V or less
0.1mA or less
20 to 25ms
Specifications 5
PG0
3.0 to 5.5V DC
Differential line driver or
open collector transistor
6 to 20mA
6.0mA or more
1mA or less
Pulse width 50ms or more
Clear signal (CLR)
⎯
5-2