Print Mode - MIMAKI JV3-250 SP Operation Manual

PRINT MODE

Sets the plot quality, plot direction, and logical seek.
QUALITY :
DIRECTION :
LOGICALseek :
Downloaded From ManualsPrinter.com Manuals
Select the quality image from three items.
(STANDARD, FINE, FAST)
Specifies the head movement direction along which plotting is made.
[UNI-D] specifies that plotting is made while the head is moving to the left.
[BI-D] specifies that plotting is made while the head is moving to the left and right.
This mode allows higher plotting speed with a lower plot quality than UNI-D.
(UNI-D, BI-D)
Normally, the head moves all the way to both ends of the medium to make plotting.
With LOGICAL seek, the head moves to the left and right according to the width of the
plot image to make plotting.
This can reduce the plotting time.
The head movements are shown below.
OFF (UNI-DIRECTIONAL)
ON (UNI-DIRECTIONAL)
OFF (BI-DIRECTIONAL)
ON (BI-DIRECTIONAL)
- 4.6 -