Troubles For Which Error Messages Are Given On The Lcd; Errors Accompanied By Warnings - MIMAKI JV3-250 SP Operation Manual

Troubles for which error messages are given on the LCD

If something is wrong with the device, the buzzer sounds and a corresponding error message is given
on the LCD.
Take an appropriate corrective measure in accordance with the message.

Errors accompanied by warnings

These errors arise on the ink-related components.
Warning message
< LOCAL >
CARTRIDGE
< LOCAL >
NEAR END
< LOCAL >
INK END
< LOCAL >
timeLIMIT
< LOCAL >
REPLACE WIPER
< LOCAL >
DO TEST DRAW
Downloaded From ManualsPrinter.com Manuals
The mounted ink cartridge is
defective.
KKMMCCYY
The amount of ink remaining in
the ink cartridge is insufficient.
KKMMCCYY
The ink cartridge has run out of
ink.
KKMMCCYY
The ink cartridge will expire
soon or has expired.
KKMMCCYY
Time to replace the wiper in the
capping station with a new one
has come.
The nozzle recovery cannot be
expected because the device is
left for a prolonged period of
time.
Cause
Press the [ENTER] key to display
the details of the error. Check the
error.
Printing can be continued in file-
by-file basis by pushing the
[REMOTE] key. However, it is
recommended to replace the ink
cartridge of which number is
shown on the LCD with a new
one.
Replace the ink cartridge of
which color is shown on the LCD
with a new one.
Printing can be continued in file-
by-file basis by pushing the
[REMOTE] key. However, it is
recommended to replace the ink
cartridge of which number is
shown on the LCD with a new
one.
Printing will be enabled by
pushing the [REMOTE]. Then,
the error message will not appear
until the power is returned on. It
is recommended, however, to
replace the wiper with a new one
as soon as possible.
Make test plotting. If nozzle
missing is serious, execute [STA-
TION] - [WASH] for maintenance.
- 6.5 -
Corrective measure