Figure 135. DVD drive cable routing
Step 6.
Replace the air baffle (see "Replacing the air baffle" on page 192).
Step 7.
Replace the cover (see "Replacing the cover" on page 190).
Step 8.
Slide the server into the rack.
Step 9.
Reconnect the power cords and any cables that you removed.
Step 10. Turn on the peripheral devices and the server.
Removing a memory module
Use this information to remove a memory module.
To remove a dual inline memory module (DIMM), complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 31.
Step 2.
Turn off the server and peripheral devices and disconnect all power cords.
.
Chapter 6
Removing and replacing components
213