Dsa Checkpoint Panel Test Results; Test Results For The Dsa Checkpoint Panel Test - Lenovo System x3550 M4 Installation And Service Manual

2. Verify whether the firmware is at proper level.
3. Rerun the test.
4. If the problem remains, contact your IBM technical-support representative.
Related links
– IBM Support website
– Latest level of DSA
– Latest level of BMC/IMM
• 218-906-000 : Brocade:InternalLoopbackTest Failed
A failure was detected during the Loopback test.
Recoverable
No
Severity
Error
Serviceable
Yes
Automatically notify support
No
User Response
Complete the following steps:
1. Rerun the test.
2. Verify whether the firmware is at proper level.
3. Rerun the test.
4. If the problem remains, contact your IBM technical-support representative.
Related links
– IBM Support website
– Latest level of DSA
– Latest level of BMC/IMM

DSA checkpoint panel test results

The following messages can result when you run the checkpoint panel test.

Test results for the DSA checkpoint panel test

The following messages can result when you run the DSA checkpoint panel test.
• 180-000-000 : Check-point Panel Test Passed
Check-point Panel Test Passed.
834
System x3550 M4 Installation and Service Guide